vs-mbr20...ctpbf series, vs-mbr20...ct-n3 series www.vishay.com vishay semiconductors revision: 04-dec-13 1 document number: 94290 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 schottky rectifier, 2 x 10 a features ? 150 c t j operation ? low forward voltage drop ? high frequency operation ? high purity, high temperature epoxy encapsulation for enhanced mechanical strength and mois ture resistance ? guard ring for enha nced ruggedness and long term reliability ? designed and qualified according to jedec ? -jesd47 ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 description this center tap schottky rectif ier has been optimized for low reverse leakage at high temper ature. the proprietary barrier technology allows for reliable operation up to 150 c junction tempera ture. typical applications are in switching power supplies, converters , freewheeling diodes, and reverse battery protection. product summary package to-220ab i f(av) 2 x 10 a v r 80 v, 90 v, 100 v v f at i f 0.70 v i rm max. 6 ma at 125 c t j max. 150 c diode variation common cathode e as 24 mj anode 13 2 base common cathode 2 common cathode anode to-220ab available major ratings and characteristics symbol characteristics values units i f(av) rectangular waveform (per device) 20 a i frm t c = 133 c per leg 20 a v rrm 80/100 v i fsm t p = 5 s sine 850 a v f 10 a pk , t j = 125 c 0.70 v t j range - 65 to + 150 c voltage ratings parameter symbol mbr2080ct pbf mbr2080ct -n3 mbr2090ct pbf mbr2090ct -n3 mbr20100ct pbf mbr20100ct -n3 units maximum dc reverse voltage v r 80 90 100 v maximum working peak reverse voltage v rwm
vs-mbr20...ctpbf series, vs-mbr20...ct-n3 series www.vishay.com vishay semiconductors revision: 04-dec-13 2 document number: 94290 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) pulse width < 300 s, duty cycle < 2 % absolute maximum ratings parameter symbol test conditions values units maximum average ? forward current per leg i f(av) t c = 133 c, rated v r 10 a per device 20 peak repetitive forward current per leg i frm rated v r , square wave, 20 khz, t c = 133 c 20 non-repetitive peak surge current i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 850 surge applied at rated load conditions halfwave, ? single phase, 60 hz 150 peak repetitive reverse surge current i rrm 2.0 s, 1.0 khz 0.5 non-repetitive avalanche energy per leg e as t j = 25 c, i as = 2 a, l = 12 mh 24 mj electrical specifications parameter symbol test conditions values units maximum forward voltage drop v fm (1) 10 a t j = 25 c 0.80 v 20 a 0.95 10 a t j = 125 c 0.70 20 a 0.85 maximum instantaneous reverse current i rm (1) t j = 25 c rated dc voltage 0.10 ma t j = 125 c 6 threshold voltage v f(to) t j = t j maximum 0.433 v forward slope resistance r t 15.8 m ? maximum junction capacitance c t v r = 5 v dc (test signal range 100 khz to 1 mhz) 25 c 400 pf typical series inductance l s measured from top of term inal to mounting plane 8.0 nh maximum voltage rate of change dv/dt rated v r 10 000 v/s thermal - mechanical specifications parameter symbol test conditions values units maximum junction temperature range t j - 65 to 150 c maximum storage temperature range t stg - 65 to 175 maximum thermal resistance, ? junction to case per leg r thjc dc operation 2.0 c/w typical thermal resistance, ? case to heatsink r thcs mounting surface, smooth and greased ? (only for to-220) 0.50 maximum thermal resistance, ? junction to ambient r thja dc operation ? (for d 2 pak and to-262) 50 approximate weight 2g 0.07 oz. mounting torque minimum 6 (5) kg cm (lbf in) maximum 12 (10) marking device mbr2080ct mbr2090ct mbr20100ct
vs-mbr20...ctpbf series, vs-mbr20...ct-n3 series www.vishay.com vishay semiconductors revision: 04-dec-13 3 document number: 94290 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - maximum forward voltage drop characteristics (per leg) fig. 2 - typical values of reverse current vs. reverse voltage (per leg) fig. 3 - typical junc tion capacitance vs. reverse voltage (per leg) fig. 4 - maximum thermal impedance z thjc characteristics (per leg) 1 10 0.8 1.2 v fm - forward voltage drop (v) i f - instantaneous forward current (a) 100 0.4 0.2 0.6 1.0 1.4 1.8 1.6 t j = 150 c t j = 125 c t j = 25 c 0 v r - reverse voltage (v) i r - reverse current (ma) 80 100 40 20 60 0.0001 0.001 0.01 0.1 1 10 100 t j = 150 c t j = 50 c t j = 100 c t j = 125 c t j = 25 c t j = 75 c 10 v r - reverse voltage (v) c t - junction capacitance (pf) 1000 100 080 100 40 20 60 t j = 25 c 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) 1 0.01 10 single pulse (thermal resistance) d = 0.75 d = 0.50 d = 0.33 d = 0.25 d = 0.20 notes: 1. duty factor d = t 1 /t 2 2. peak t j = p dm x z thjc + t c p dm t 1 t 2
vs-mbr20...ctpbf series, vs-mbr20...ct-n3 series www.vishay.com vishay semiconductors revision: 04-dec-13 4 document number: 94290 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - maximum allowable case temperature vs. average forward current (per leg) fig. 6 - forward power loss characteristics (per leg) fig. 7 - maximum non-repeti tive surge current (per leg) note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; ? pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); ? pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = rated v r 0121416 i f(av) - average forward current (a) allowable case temperature (c) 8 6 4 210 dc 100 110 120 130 140 150 square wave (d = 0.50) rated v r applied see note (1) average power loss (w) i f(av) - average forward current (a) 0121416 8 6 4 210 0 2 4 6 8 10 rms limit d = 0.20 d = 0.25 d = 0.33 d = 0.50 d = 0.75 dc 100 1000 t p - square wave pulse duration (s) i fsm - non-repetitive surge current (a) 100 10 000 10 1000 at any rated load condition and with rated v rrm applied following surge
vs-mbr20...ctpbf series, vs-mbr20...ct-n3 series www.vishay.com vishay semiconductors revision: 04-dec-13 5 document number: 94290 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per t/r minimum order quantity packaging description vs-mbr2080ctpbf 50 1000 antistatic plastic tube vs-mbr2080ct-n3 50 1000 antistatic plastic tube vs-mbr2090ctpbf 50 1000 antistatic plastic tube vs-mbr2090ct-n3 50 1000 antistatic plastic tube vs-mbr20100ctpbf 50 1000 antistatic plastic tube VS-MBR20100CT-N3 50 1000 antistatic plastic tube links to related documents dimensions www.vishay.com/doc?95222 part marking information to-220ab pbf www.vishay.com/doc?95225 to-220ab -n3 www.vishay.com/doc?95028 device code - schottky mbr series - current rating (20 = 20 a) - voltage ratings - ct = essential part number - mbr 20 100 ct pbf 080 = 80 v 090 = 90 v 100 = 100 v -n3 = halogen-free, rohs compliant, and totally lead (pb)-free pbf = lead (pb)-free 2 3 4 5 6 5 1 3 2 4 6 1 - vishay semiconductors product vs-
document number: 95222 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 08-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 to-220ab outline dimensions vishay semiconductors dimensions in millimeters and inches notes (1) dimensioning and tolerancin g as per asme y14.5m-1994 (2) lead dimension and fini sh uncontrolled in l1 (3) dimension d, d1 and e do not in clude mold flash. mold flash shall not exceed 0.127 mm (0.005" ) per side. these dimensions are measured at the outermost extremes of th e plastic body (4) dimension b1, b3 and c1 apply to base metal only (5) controlling dimensions: inches (6) thermal pad contour optional within dimensions e, h1, d2 and e1 (7) dimensions e2 x h1 define a zone where stamping and singulation irregularities are allowed (8) outline conforms to jedec to- 220, except a2 (maximum) and d2 (minimum) where dimensions are derived from the actual package outline symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.25 4.65 0.167 0.183 e 10.11 10.51 0.398 0.414 3, 6 a1 1.14 1.40 0.045 0.055 e1 6.86 8.89 0.270 0.350 6 a2 2.56 2.92 0.101 0.115 e2 - 0.76 - 0.030 7 b 0.69 1.01 0.027 0.040 e 2.41 2.67 0.095 0.105 b1 0.38 0.97 0.015 0.038 4 e1 4.88 5.28 0.192 0.208 b2 1.20 1.73 0.047 0.068 h1 6.09 6.48 0.240 0.255 6, 7 b3 1.14 1.73 0.045 0.068 4 l 13.52 14.02 0.532 0.552 c 0.36 0.61 0.014 0.024 l1 3.32 3.82 0.131 0.150 2 c1 0.36 0.56 0.014 0.022 4 ? p 3.54 3.73 0.139 0.147 d 14.85 15.25 0.585 0.600 3 q 2.60 3.00 0.102 0.118 d1 8.38 9.02 0.330 0.355 ? 90 to 93 90 to 93 d2 11.68 12.88 0.460 0.507 6 13 2 d d1 h1 q 13 2 c c d d 3 x b2 3 x b (b, b2) b1, b3 (h1) d2 detail b c a b l e1 lead tip e e2 ? p 0.014 a b m m 0.015 a b mm s eating plane c a2 a1 a a a lead assignments diode s 1. - anode/open 2. - cathode 3. - anode conforms to jedec outline to-220ab (6) (6) (7) (6) (7) e 2 x l1 (2) detail b s ection c - c and d - d view a - a ba s e metal plating (4) (4) c1 c (6) thermal pad (e) e1 (6)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
